Penetration Testing Cost for UK Managed Service Providers (2026)

By EJN Labs · 12 Nov 2026 · 7 min read

A penetration test for a UK managed service provider typically costs £2,200 to £42,000 in the UK market. The low end is a short test of the perimeter and remote access. The high end covers the management console, the perimeter, the internal network and the Microsoft 365 and Entra ID tenants you administer. The price is the number of testing days multiplied by a day rate of £1,100 to £1,400.

What does a penetration test cost for a managed service provider?

Most managed service providers fall into one of four scopes, typically costing between £2,200 and £42,000 in the UK market. What you pay depends on how many tools are tested and how many customer environments the test has to cross, because that sets the number of testing days. The table shows the typical range for each scope.

ScopeWhat is testedDaysTypical UK cost
Perimeter and remote accessInternet-facing services, VPN and remote-access gateways, and exposed management interfaces2 to 3 days£2,200 to £4,200
One management consoleA PSA or RMM console with two customer environments and distinct privileged roles, testing customer separation8 to 12 days£8,800 to £16,800
Console plus perimeterThe console above, plus the internet-facing services around it10 to 15 days£11,000 to £21,000
Full MSP toolingThe console, a larger perimeter, the internal network and Active Directory, and the Microsoft 365 and Entra ID tenants you administer18 to 30 days£19,800 to £42,000

These are market ranges, worked out from typical engagement lengths and UK day rates of £1,100 to £1,400. They are a guide for budgeting. The pricing page shows the engagement lengths for each type of test, and the quote form gives an exact fixed price for your scope.

What drives the price?

The number of testing days drives the price, and the scope drives the number of days. For a managed service provider the main driver is customer separation. A tester has to prove that a compromised console account, agent or session cannot reach another customer, and that needs at least two customer environments with distinct privileged roles.

  • Number of tools. The PSA, the RMM platform, the help desk and the backup console are separate tests, even when one vendor supplies two of them.
  • Privileged roles. Every staff role that can act across customers adds a boundary to test, such as technician, engineer, service manager and administrator.
  • Customer environments in scope. More tenants and more environments mean more separation scenarios. A test tenant and a small number of representative customers keeps the day count predictable.
  • Microsoft 365 and Entra ID. Delegated administration across client tenants adds work, because each permission path has to be followed. See cloud penetration testing.
  • Network size. The number of internet-facing addresses, hosts and Active Directory domains sets the length of the infrastructure work. See internal network penetration testing.

Tester grade is not a pricing factor, and neither is the size of the testing company. Two quotes for the same scope should differ mainly in the number of days. If one quote is much lower, compare the day counts first.

What is included, and what costs extra?

A quote should cover scoping, testing, the report, a walkthrough of the findings and a retest. Ask every company you approach to confirm each of those in writing, because retests and out of hours work are the two items that most often appear later as extra charges.

With EJN Labs, the quote is a fixed price for a defined scope. It includes:

  • Testing by UK-based, CREST-certified testers.
  • Findings in a client portal as they are confirmed, each with a CVSS score.
  • The report on the last day of testing, and a walkthrough call.
  • Free retests until findings are resolved.
  • Out of hours slots, with no out-of-hours, callout, cancellation or rescheduling fees.

What changes the price is a change of scope: a tool added after the quote, extra privileged roles, or more customer environments than the ones described. If the scope grows, you get a new fixed price before any extra work starts.

How do you get a quote, and what will you be asked?

Send the list of tools you want tested and say which customer clause has asked for the evidence. A testing company needs a few facts about each tool to count the days. Having them ready is the fastest way to get a firm price, and it makes quotes from different companies comparable.

  1. Which tools are in scope: PSA, RMM, help desk, backup, Microsoft 365 administration, internal networks.
  2. For each tool, the privileged roles your staff use and which of them can act across customers.
  3. Whether you can provide a test tenant or a staging console, and which customer environments could stand in as representative.
  4. For the perimeter, roughly how many internet-facing addresses and remote-access services you have.
  5. For Microsoft 365, the number of client tenants you administer and how delegated access is set up.
  6. The exact wording of the customer clause, including any interval, and any dates to avoid, such as a contract renewal or a customer audit.

MSPs and technology suppliers can use a CREST-accredited company or a CHECK provider, depending on what their requirement states. EJN Labs is CREST-accredited. If the customer’s clause names an accreditation, say so when you ask for the quote.

Does a customer contract decide what you pay?

Indirectly. No public rule makes a customer contract require a test, so the clause decides what you buy. If it asks for Cyber Essentials Plus, that is an assessor-led audit, not a penetration test. The NCSC’s Cloud Security Principle 3 is guidance for buyers, not a mandate, and it is where many customer clauses on separation come from.

How EJN Labs approaches pricing for managed service providers

EJN Labs is a CREST-accredited UK penetration testing company with a dedicated managed service provider service. We scope each tool by what it can reach and who uses it, count the days, and give you one fixed price for the defined scope.

We test the PSA and customer management console, the RMM and remote-access platform, the help desk and ticketing system, multi-tenant Microsoft 365 and Entra ID administration, the backup platform, and the client networks and Active Directory you administer. You provide a designated test tenant, a staging console or a small number of representative customer environments, and we agree in writing what stays out of scope before testing starts.

Testing is safe by default on production, with no denial of service. Retests are free until findings are resolved, so the price you agree covers the evidence that issues were fixed as well as the evidence that they were found.

Frequently Asked Questions

How much does a penetration test cost for an MSP?

Typically £2,200 to £42,000 in the UK market. A perimeter-only test of 2 to 3 days is £2,200 to £4,200. One management console of 8 to 12 days is £8,800 to £16,800. Full MSP tooling of 18 to 30 days is £19,800 to £42,000. These ranges use UK day rates of £1,100 to £1,400.

Why does testing customer separation take longer?

Because a tester has to cross customer, role and console boundaries to show that one customer cannot reach another. That needs at least two customer environments with distinct privileged roles. A single management console tested this way is typically 8 to 12 days.

Is a retest included in the price?

It depends on the company, so ask for it in writing. With EJN Labs, retests are free until findings are resolved, and there are no out-of-hours, callout, cancellation or rescheduling fees. The quote is a fixed price for a defined scope.

How long does a penetration test take for an MSP?

Between 2 and 30 testing days for the scopes in the table above. A perimeter test is typically 2 to 3 days, one management console is 8 to 12 days, and full MSP tooling is 18 to 30 days. EJN Labs delivers the report on the last day of testing.

Does Cyber Essentials Plus replace a penetration test?

No. Cyber Essentials Plus is an assessor-led technical audit, and neither tier requires a penetration test. If a customer clause asks for an independent test of your tooling, the certificate alone will not answer it. EJN Labs is also an IASME Certification Body for both tiers.

Get a fixed price for your managed service provider

Tell us which tools are in scope and which customer clause has asked for the evidence. Request a fixed-price quote and we will come back with the number of days, the price and the earliest start date.

Related: Customer Contracts and Cyber Essentials: Do MSPs Need a Penetration Test?, Best Penetration Testing Companies for UK Managed Service Providers, penetration testing for UK managed service providers, penetration testing cost in the UK, web application penetration testing cost and network penetration testing cost.

Leave a Reply

Your email address will not be published. Required fields are marked *